Product
Description
Reverse Osmosis Plant
Technical specification
Reverse osmosis process is a membrane process in which a synthetic semi permeable membrane is used to separate water from dissolved impurities. When a semi permeable membrane separates a dilute and concentrated solution of salts, due to Osmosis, the water from the dilute solution side passes through the membrane to the concentrated side till osmotic equilibrium is attained. Now, if pressure is applied and increased gradually on the concentrated side, the flow of water continues to reduce till the applied pressure is equal to the osmotic pressure. Any pressure in excess of the osmotic pressure reverses the direction of flow of water and water from the concentrated side enters the dilute side. This process is called the Reverse Osmosis. The water fed to the RO plant where the water gets separated into two streams, viz. Permeate containing very little amount of dissolved impurities and Reject having more concentrated impurities. The Permeate is collected in the Permeate Water tank. Depending on the feed water characteristics the recovery will be decided and it can be between 30-75%. User friendly, does not require continuous monitoring The feed shut off valve will open only when the system is in operation. Otherwise it closes automatically. In case of faulty operation, the valve shuts off. This also allows flushing to take place once the plant is stopped. This helps to conserve water, as the water is not allowed to pass through when the plant is stopped. One SS 316 low pressure gauge to measure the inlet and outlet pressure of the cartridge filter. Pressure Transmitters for Measuring Feed and Reject Pressure. Sampling valve for cartridge filter, inlet/outlet quality. Sampling valve for high pressure feed and reject quality. Check valve for product/reject to protect from water hammering. Matrix – Real Time Remote Monitoring Technology - With IONICs Remote monitoring technology the system can be monitored anywhere from the world as long as it is connected to internet. Ionic Engineering for the first time in India has developed an advanced Reverse Osmosis control system which measures in real time the following parameters for easy and reliable operation of the membrane based system. This feature is unique to our design and is not available in competetive systems. It is well known that Reverse osmosis systems can be very sensitive to changes in the operating conditions. For example, temperature changes or feed water concentration changes can greatly affect either the product flow or the product conductivity. R.O systems design and operating conditions are different and hence the data like flow, pressure, salt rejection needs to be normalized to the start up or standardized conditions which is seldom the case. Fouling of the membranes due to particles, in organic salts, biofilm etc. affects the membrane process and unless the data is properly collected and analysed will result in poor performance and if corrective action is not taken in time, may lead to irreversible damage to the membranes. Th system automatically stores the start up value and compare this with actual present normalised value and indicates in clear English text what is the condition of the membrane and system performance. This system aslo helps in taking a decision on timely cleaning of the membranes and help in cleaning process. The advanced proprietary software developed by us calculates the allowable decline in performance value and displays in bar graph for easy understanding by the operator. The system also has a unique (Permissble Decline in Performance) indicator which indicates whether the normalised values are with in the limit or out of the range so that the nature of the problem can be easily identified. went one step ahead to make the monitoring and trouble shooting easier. We incorporated articial inteliigence in system with which data is analysed and possible problems like scaling, fouling, O ring and membrane damage are predicted to take the guess work out of the operators mind.
Bulk manufacturing
Bulk manufacturers of Reverse Osmosis Plant in China
Bulk production of Reverse Osmosis Plant runs on our own lines in China, quoted factory-direct so the unit price falls as the quantity rises instead of sitting at a fixed list price. Wholesale buyers and project contractors sourcing reverse osmosis plant from China usually begin with a quantity and a required delivery date, and that is all we need to return unit cost at volume, crate dimensions, gross weight and container fill. If you are comparing quotations from several suppliers, ask each of them to state the make of the major components: on this class of machine that is where real cost differences hide, not in the headline figure.
OEM and ODM production is available on bulk quantities of reverse osmosis plant, which for most buyers means voltage and frequency matched to the destination, a capacity that fits the line it is going into, contact parts specified for the material being handled, and branding, manuals and cartons in your own name. Plan on three to six weeks in production for a made-to-order build plus transit, or seven to ten working days where the item is in stock.
If you are still narrowing down the specification, the wider water treatment solutions range is worth comparing before you send the enquiry.
- Factory-direct pricingUnit cost banded by quantity, held for the validity period on the quotation.
- OEM and private labelBrand plate, manual and carton artwork in your own name on volume orders.
- Built to specificationVoltage, phase, frequency, capacity and contact materials set for your market.
- Inspection before dispatchIn-process checks plus a photographed pre-dispatch report for your approval.
- Container planningWe confirm the fill for a 20ft, 40ft or 40ft high-cube before you commit.
- Repeat ordersBuild specification kept on file so a second order is quoted against the same machine.
Export and shipping
Importing Reverse Osmosis Plant from China
The documents matter as much as the machine when you are importing reverse osmosis plant from China. HS classification is settled at quotation stage, and the consignment ships with a commercial invoice, packing list and certificate of origin, plus a fumigation certificate and marine insurance where your customs authority asks for them. Pricing is quoted FOB from the port of loading if you are using your own forwarder, or CIF to a named destination port if you want freight handled at our end.
Crating is built for the voyage rather than for a shelf, with moisture protection and shock resistance matched to the sea time to your port. If you are buying several ranges at once they can travel as one consolidated consignment on a single bill of lading, which reduces both the cost per unit and the number of documents to clear. Every machine ships with installation drawings, an operating manual and a spare parts list.
- HS classificationSettled before the quotation is issued, not at your port.
- Document setInvoice, packing list, certificate of origin, fumigation certificate, insurance.
- FOB or CIFYour forwarder from the loading port, or ours to your named destination port.
- Seaworthy packingCrating and moisture protection sized for the sea time to your market.
- Consolidated shippingSeveral ranges combined onto one bill of lading.
- After deliveryInstallation drawings, manuals and a spare parts list with every machine.
Buyer questions
Reverse Osmosis Plant — frequently asked
Anything not covered here, put it in your enquiry and we will answer it with the quotation.
Email the sales deskWhat is the minimum order quantity for Reverse Osmosis Plant?
reverse osmosis plant can be supplied as a single unit where it is capital machinery, with banded pricing once the order runs to several units. Hand tools, spares and consumables are quoted in batch or container quantities instead. Tell us the quantity and the delivery window and we will confirm which minimum applies.
Can Reverse Osmosis Plant be manufactured to our own specification?
Yes — OEM and ODM production is standard on bulk orders. The usual changes are voltage and frequency for the destination, capacity to suit the line it feeds, contact parts specified for the material being handled, and your own branding on the machine and packaging.
What is the production lead time for a bulk order?
Made-to-order machines typically take three to six weeks in production, plus sea freight transit to your port. Ready-stock items dispatch within seven to ten working days. Exact lead time is confirmed in writing on the quotation.
Can we inspect the goods before shipment?
Yes. Every consignment goes through in-process checks and a pre-dispatch inspection, and the photographed report is shared for your approval before the container is sealed. Third-party inspection by SGS, Bureau Veritas or an agency you nominate can be built into the terms.
What are your payment and shipping terms?
Terms are set on the proforma invoice and depend on order value and destination. Advance payment by telegraphic transfer against a proforma invoice is standard, and irrevocable letters of credit are accepted on larger capital orders. Shipping is quoted FOB from the port of loading or CIF to a named destination port.
Do you supply spare parts and documentation?
Installation drawings, an operating manual and a spare parts list are issued with every machine. Spares can be ordered against the original build specification, which we keep on file, and for plant-scale orders commissioning support can be arranged at quotation stage.
Related equipment
Reverse Osmosis Plant from EquipMachines
Similar items you may want to compare before sending an enquiry.