Product
Description
Utilities Incubation Room
Technical specification
House structure:
The structure of the general use of insulation board (double-sided color steel, the middle plus insulation materials) assembled in the field, the room size are designed according to customer requirements. The whole room looks beautiful, solid structure, while easy to install, short construction period. In the room wall, according to the need to set the observation window, easy to observe the indoor product testing in the outdoors. In the wall is also equipped with different voltage socket to meet the needs of product testing.
Duct system:
Usually the heating fan and duct system installed in the roof, do not take up other space, the general air duct system by the circulating air system and overheating exhaust system, the indoor circulation through the heater after heating by the blower by the insulation duct back to the room, Repeat the cycle, so that the room temperature to maintain the set range. When the room temperature exceeds the alarm set value, the exhaust fan start, take away the indoor overheating gas, while the outdoor cold air into the room and hot air mixing, so that the room temperature back to normal.
Control System:
The control system of the fermentation bank is controlled by PLC through the program. The control system adopts the two-stage PID to adjust the heating quantity to realize the precise control of the room temperature. At the same time, the temperature controller can carry out real-time display of any six-point temperature in the room. Customers accurately grasp the room temperature situation. The control system also set a variety of protection functions, over-temperature alarm protection, fan failure alarm protection, no wind alarm protection, indoor smoke sensor alarm protection, and improve the protection function to ensure that the fermentation tank can be long-term stability and trouble-free operation.
Characteristics of Thermostatic Fermentation Library
1. Temperature control accuracy, high precision. As a result of the unique duct system design and electronic control system, to maintain a high degree of uniformity throughout the room temperature, much higher than similar products.
2. Room set a wide temperature range, continuously adjustable. (If the customer special requirements, you can design a higher temperature products).
3. Room multi-point temperature rolling display, monitoring accurate, clear (optional).
4. System protection is complete, to ensure long-term stability and trouble-free operation.
5. Beautiful appearance, easy construction, short construction period.
|
Size |
5400x4200x2500 |
|
Note: The size and temperature control range of customized according to customer requirements, to meet customer requirements. |
|
|
Temperature Range |
RT?45?? Can be set |
|
Internal material |
Galvanized color steel or SUS304 stainless steel plate |
|
External material |
Galvanized color steel |
|
Insulation materials |
Hard polyurethane |
|
Insulation thickness |
100mm |
|
Analytical precision |
0.1??0.01? |
|
Control accuracy |
±1? |
|
Temperature deviation |
±2? |
|
Volatility |
±1? |
|
Heating time |
An average of 1 ~ 5 ? / minute |
|
Cooling time |
10 to 60 minutes |
|
Series Noise |
? 55 dB |
|
Control system |
Programmable: LCD color LCD controller or standard type: LED digital controller |
|
Heating system |
Special high-speed electric heaters |
|
Circulatory system |
Specially designed low noise, multi-wing circulating air system |
|
Safety devices |
Leakage power protection, load protection, over-temperature protection, fan overheat protection, sound and light alarm, etc. |
|
Other accessories |
Glass observation window, the test hole, smoke alarms, indoor lighting, temperature recorder (optional) |
|
System power |
AC 220/380(±10%)V?50HZ±0.5HZ |
Bulk manufacturing
Bulk manufacturers of Utilities Incubation Room in China
As bulk manufacturers of Utilities Incubation Room in China, we quote from the factory rather than from a trading margin, so the price moves with the quantity you actually need. Production runs are scheduled against your order rather than pulled from a shelf, which is what makes volume pricing possible on a machine like this. Importers, distributors and project buyers sourcing utilities incubation room normally start with a target quantity and a delivery window; from those two numbers we come back with unit cost at that volume, packing dimensions, gross weight and how the order fills a container. Where a buyer is comparing several Chinese factories, we will also confirm exactly which components are used, because that is usually where quotations differ more than the headline price does.
The machine can be built to a buyer's specification. Operating voltage, phase and frequency are set for the destination country, and capacity, feed size, contact materials and control options are all changeable at the build stage. OEM and private-label production is available on volume orders: your brand plate, your manual, your carton artwork. Made-to-order production typically runs three to six weeks before sea freight; ready-stock items dispatch inside seven to ten working days.
If you are still narrowing down the specification, the wider utilities equipment range is worth comparing before you send the enquiry.
- Factory-direct pricingUnit cost banded by quantity, held for the validity period on the quotation.
- OEM and private labelBrand plate, manual and carton artwork in your own name on volume orders.
- Built to specificationVoltage, phase, frequency, capacity and contact materials set for your market.
- Inspection before dispatchIn-process checks plus a photographed pre-dispatch report for your approval.
- Container planningWe confirm the fill for a 20ft, 40ft or 40ft high-cube before you commit.
- Repeat ordersBuild specification kept on file so a second order is quoted against the same machine.
Export and shipping
Importing Utilities Incubation Room from China
Importing Utilities Incubation Room from China fails on paperwork far more often than it fails on product. Every consignment leaves with a commercial invoice, packing list, certificate of origin and, where the destination requires it, a fumigation certificate and marine insurance, with the HS code classified before the quotation is issued rather than argued about at your port. We quote FOB from the loading port when you have your own freight forwarder, and CIF to a named destination port when you would rather we arranged the freight.
Packing is specified for the transit, not for the warehouse: seaworthy crating, moisture protection and shock resistance sized for the sea time to your port. Where you are ordering more than one range, the shipments are consolidated into a single consignment on one bill of lading, which brings the landed cost per unit down and leaves you with one set of documents to clear. Installation drawings, operating manuals and a spare parts list are issued with every machine.
- HS classificationSettled before the quotation is issued, not at your port.
- Document setInvoice, packing list, certificate of origin, fumigation certificate, insurance.
- FOB or CIFYour forwarder from the loading port, or ours to your named destination port.
- Seaworthy packingCrating and moisture protection sized for the sea time to your market.
- Consolidated shippingSeveral ranges combined onto one bill of lading.
- After deliveryInstallation drawings, manuals and a spare parts list with every machine.
Buyer questions
Utilities Incubation Room — frequently asked
Anything not covered here, put it in your enquiry and we will answer it with the quotation.
Email the sales deskWhat is the minimum order quantity for Utilities Incubation Room?
For capital equipment like Utilities Incubation Room we can supply a single machine, and the unit price improves in bands where you need more than one. Tools, spares and consumables are a different case — those are produced in batches and quoted by the pallet or container rather than by the piece. Send the quantity you are planning together with your destination port and we will confirm the minimum that applies.
Can Utilities Incubation Room be manufactured to our own specification?
Yes. Voltage, phase and frequency are set for the destination country, and capacity, feed size, contact materials and control options can be specified at the build stage. OEM and private-label production, including brand plate, manual and carton artwork, is available on volume orders.
What is the production lead time for a bulk order?
Made-to-order machines typically take three to six weeks in production, plus sea freight transit to your port. Ready-stock items dispatch within seven to ten working days. Exact lead time is confirmed in writing on the quotation.
Can we inspect the goods before shipment?
Yes. Every consignment goes through in-process checks and a pre-dispatch inspection, and the photographed report is shared for your approval before the container is sealed. Third-party inspection by SGS, Bureau Veritas or an agency you nominate can be built into the terms.
What are your payment and shipping terms?
Terms are set on the proforma invoice and depend on order value and destination. Advance payment by telegraphic transfer against a proforma invoice is standard, and irrevocable letters of credit are accepted on larger capital orders. Shipping is quoted FOB from the port of loading or CIF to a named destination port.
Do you supply spare parts and documentation?
Installation drawings, an operating manual and a spare parts list are issued with every machine. Spares can be ordered against the original build specification, which we keep on file, and for plant-scale orders commissioning support can be arranged at quotation stage.
Related equipment
Utilities Incubation Room from EquipMachines
Similar items you may want to compare before sending an enquiry.
